Fish portioning and packaging lineOFFERED SERVICES
1. One new set of equipment, intended for weighing
and packaging of frozen fish.
Frozen fish weighing-portioning device, integrated in the fish supply, sorting, 10 kg weighing and packaging line. Intended for installation at the customer's premises, taking into account dimensions and ceiling height.
Multi-head portioning device MBP 14C2 EW 60.
Number of heads: 14 pcs.
Type of weighing: weight sensors.
Weighing accuracy: 0.1–1.5 g
Volume of pockets: 5 litres.
Portioning per cycle: max. 4,000 g
Type of pocket opening: from two sides.
Nominal speed: up to 180 cycles/min.
Pocket drive: step motors.
Air dryer: above 0 degrees.
Electricity AC 240 V, 50 Hz, Consumption 1.0 kW;
Equipment weight: 800 kg.
Equipment dimensions: 2,600 x 2,600 x 1,450 mm (to be specified)
Control: 12.1” touch-sensitive display.
Number of programs: up to 99.
Range of room temperature: from 0 °C to +40 °C;
External vibration compensation: 4 built-in load sensors for external vibration compensation.
Protection class: IP 66, condensate resistant, fully washable
Interface: Ethernet port, USB 2 GB from the panel.
Automatic zeroing: Yes.
Remote diagnostics: Yes. RCU cable.
Weighing accuracy is determined during launching-
adjustment works, depending on fish portions.
Flow Pack type packaging equipment PFM Zenith
GENERAL EQUIPMENT DATA:
The equipment is intended for forming packaging from a film roll.
width 100–320 mm. • max. packaging volume – 6 litres.
length 80–400 mm. • max. roll width – 700 mm. Film roll diameter – max. 350 mm.
Mechanical speed: Up to 90 cycles per minute.
The actual speed will be specified after tests with the actual product and packaging material
EQUIPMENT BASIC ASSEMBLY INCLUDES:
EQUIPMENT DIMENSIONS (basic model):
Height: 1,600 mm. Air consumption: 350 NL/minute.
Width: 1,280 mm. Electricity consumption: 4 kWh.
Depth: 2,200 mm. Connection: 400 V. 3 Ph. -
Weight: 550 kg.
Number of cycles per minute is specified during the launching-adjustment works, depending on fish portions.
From 7–15 mm – capacity 2 t/h. From 15–22 mm – capacity 1.2 t/h.
4. MULTI-FUNCTIONAL LINE, corresponding to the customer's requirements and premises.
Intended for fish delivery from IFQ, sorting, accumulation in containers, when required,
weighing into 10 kg portions, for forming cardboard boxes and feeding the weighted boxes for sealing and placement on pallets.
THE LINE CONSISTS OF:
We manufacture customised universal mobile scales according to customer's needs –
Intended for working at the fish sorting line. Can be used at any output of sorted portions.
This work place can be modified with various conveyor belts for different products and with various conveyor lifting angles, for example, if filling in containers or bags is required. Weight ranges and the weighted product have to be specified before ordering.
Components: Conveyor, scales with fixed weight (as standard equipment) for 15, 20, 25, 30 kg, which is set by a switch, control cabinet.
The weighing conveyor was manufactured for weighing gingerbread 8 t per shift
The weighing conveyor is intended for use in the food sector. It is easily adaptable to various products (fish, meat, vegetables, etc.). Minimal product weight deviation. We can manufacture it according to the customer’s requirements.
Installation of additional components is possible. Below you can see a description of the weighing conveyor.
It can weigh all bulk products with diameter range from 5 mm to 80 mm
3 F, 380 V, 50 Hz. Maximum total power consumption: 1.75 kW
Pressure before regulator 0.6 MPa
Work pressure 0.5 MPa
1 l of air at P = 0.5 MPa » required for preparation of a single portion
Time for preparation of a single portion » 6 s (depending on the weight)
Maximum weight of one portion is 30 kg (can be increased)
Each scales can be operated separately
Delivery period of assembly parts 1 month
Product manufacturing period 1 month
For additional information contact the Information Service
Automation of box packaging
Rebuilding semi-automatic box film wrapping equipment - automatic.
Conveyor for wrapping glazed paper packs
The equipment is intended for paper bags with width from 60–120 mm (wider widths are also possible), depth 40–70 mm and more without feeding conveyor, min. height depends on the bag filling, adding 100 mm for broaching and wrapping, max. height without feeding conveyor up to 350 mm.
Length ~2,500 mm\ Width ~1,000 mm\ Height ~1,500 mm\
Work height 1,150mm
Motors - 2 pcs.
Frequency converter – EMERSO UNIDRIVE M200
Optical sensor S51-PA- 2-B01- PK MOQ 10
Sealer HB 5010 Buhnen Klebesystem
Total electric power consumption – 3.5 kWt